21700 · NMC · CELL READOUT

4.0 Ah at 40 A continuous. Rated 600 cycles to 50% energy.

A high-drain 21700 for Indian pack assemblers, stocked in India, with grading data for every cell. Six short steps: configure your pack, check the test data, see the cost, then ask for samples.

Supplier-stated, independent verification in progress
Capacity
4.0 Ah
Nominal
3.6 V
Max continuous
40 A
Pilot price
₹290 / cell
STEP 01SEGMENT

What do you build?

Pick your line of work. The pack builder, examples and cost maths below adjust to it.

70.0 mm⌀ 21.0 mm+ cap / CIDjelly rollmandrel− can
STEP 02PACK BUILDER

Configure your tool packs

Set the platform and load. Readouts update live against the cell's 40 A continuous rating.

Platform
Parallel strings
60 A
2,000 packs
LIVE READOUT5S2P
Cells / pack
10
Cells / month
20,000
Pack capacity
8.0 Ah
Pack energy
144 Wh
Current per cell30.0 A
01020304050A / CELL · RATED 40 A

Headroom 10.0 A against 40 A continuous.

Layout · 5S × 2P
S1S2S3S4S5
STEP 03CYCLE LIFE

Cycle life at 40 A, end points shown

Each line ends at its warranty point. 21700 rated 600 cycles at 40 A to 50% energy (supplier-stated).

Supplier-stated, independent verification in progress
  • ● Tafel 21700 · 600 cycles @ 40 A → 50% energy
  • ○ Ampace JP40 · 400 cycles @ 40 A → 60% capacity
  • ○ EVE 40PL · 400 cycles @ 40 A → ~60% capacity
  • ○ Samsung 40T · 250 cycles @ 35 A → 60% capacity
  • ○ Lishen LR2170LA · 300 cycles @ 35 A → 60% capacity

End points differ, so these are not a direct ratio. Lines are stylised between start and warranty point.

Chart summary: The Tafel 21700 is rated 600 cycles at 40 A to 50% energy. Ampace JP40: 400 cycles at 40 A to 60% capacity. EVE 40PL: 400 cycles at 40 A to ~60% capacity. Samsung 40T: 250 cycles at 35 A to 60% capacity. Lishen LR2170LA: 300 cycles at 35 A to 60% capacity. End points differ, so these are not a direct ratio.

Cycle-test protocol
Cycle
8 A charge · 10 min rest · 40 A discharge to 2.5 V or 75°C · 30 min rest · 25 ±3°C
Charge
8 A CC to 4.2 V, CV to 100 mA
Cut-off
2.5 V or 75°C surface
End point
600 cycles → 50% energy
Also tested
  • 40 A discharge at −20°C (1.0 V cut-off)
  • 0°C cycling at 6 A charge / 10 A discharge
  • Overcharge test 4.5 A to 6 V
STEP 04COST

What you'd spend on cells

Using your 20,000 cells/month from Step 02.

Your current cell

Using midpoint ₹475 of ₹400–₹550.
Public asking prices in India, ex-GST, Sep 2026.

Current cell₹475
Tafel pilot₹290
Difference / cell₹185
Monthly spend · now
₹95.0 lakh
Monthly spend · Tafel
₹58.0 lakh
Annual spend · Tafel
₹6.96 crore
Savings / pack
₹1,850
Annual savings
₹4.44 crore

Indicative pilot pricing, ex-GST. Final quote depends on volume and terms. Competitor figures: Public asking prices in India, ex-GST, Sep 2026; asking prices, not transaction prices.

STEP 05PATH

Path to approved vendor

Four stations. You decide whether to move to the next one.

BIS · BIS registration (IS 16046) in progress. Samples are supplied for engineering evaluation.
What happens

We send matched sample cells for your engineers.

You receive

20–50 cells with datasheet, cycle test reports and per-cell lot data (OCV, IR, capacity).

Typical duration

Ships in ~1 week

STEP 06REQUEST

Request an evaluation kit

20–50 cells, datasheet, test reports and per-cell lot data. Your configuration is attached.

FAQ

Questions buyers ask

5S2P · 2,000 packs/mo · 20,000 cells/mo